Charging Lithium-ion Batteries with MEAN WELL Battery Chargers

You may have noticed that in the data sheets of some MEAN WELL battery chargers, it states that the charger can be used for Lithium-ion batteries, and to contact MEAN WELL for further information.

Power Supplies Australia can advise if your MEAN WELL battery charger is suitable for charging Lithium batteries.

Image

Lead Acid vs Lithium Batteries  

There is a growing trend for caravan and RV owners to migrate from lead-acid batteries to lithium.   

Lead acid batteries have been used for many years as they have a high tolerance to fluctuations in the charging voltage, can operate in a wide range of ambient temperatures (think of the batteries in your car’s engine bay) and have a high surge current capacity. On top of that they are highly cost effective.  

The downsides of lead acid batteries are their high self-discharging rate and relatively low charge/discharge cycles, which makes them less suitable for energy storage applications.  

Lithium batteries offer high charging/discharging rates, a low self-discharge rate, and high energy density, making them a better option for storing energy for longer periods.   

There are two types of batteries commonly called Lithium-ion. One is Lithium Ion and the other is Lithium iron Phosphate or LiFePO4, commonly called Lithium Iron. The names are very similar sounding and can lead to confusion. Lithium-ion batteries are typically used in electric vehicles and electric models, such as cars and planes. Lithium Iron Phosphate batteries are typically used as a replacement for 12V Lead Acid batteries. 

Battery Charging Curves Explained 

Lead acid batteries are made up of cells in series to form a battery with more practical voltages like 12V, 24V, and 48V.  

12V, 24V, or 48V is often used loosely as an indication of the voltage range. The actual voltage varies based on the remaining battery capacity. For example, the open-circuit voltage of a typical 12V AGM lead-acid battery is between 10.8V (30% battery capacity) to 13.8V (100% capacity).  

A 3-stage charging curve is often used with lead-acid batteries, with the final stage being a float charge. This is where the charger lowers its output voltage to avoid overcharging. Although the battery at this point is close to being fully charged, it would still constantly draw power from the charger to compensate for its self-discharge.  

Image

The same chemistry type of lithium battery from different manufacturers can have different rated voltages and charging currents. Therefore, similar batteries from different manufacturers may require different charging curves.

Generally speaking, Lithium batteries don't like being charged at full voltage over a long period of time. Once they have reached their full charge, the charger should either disconnect or fall back to float charge, usually 13.6V. This means the "CDM" models mentioned above are not suitable for charging Lithium batteries. 

In some cases, a standard MEAN WELL battery charger may meet the requirements of the Lithium Iron Phosphate battery to be charged. Sometimes an adjustment is required.  

Information required by Power Supplies Australia 

For Power Supplies Australia to ascertain whether the MEAN WELL battery charger you have is suitable for Lithium Iron Phosphate batteries, we need to know the manufacturer and the manufacturer’s model number of the batteries you intend to use.  

Please note that information, such as “12V 100Ah Lithium-ion Battery LiFePO4” is just a description of the battery’s voltage, current and chemistry. The same type of battery can be produced by more than one manufacturer, each with its own specific charging requirements.  

Each battery has a unique model or part number. This is what we require.  

We can then look up the battery’s data sheet and its charging requirements.

MEAN WELL Battery Chargers that Can Charge Lithium Batteries

Power Supplies Australia stocks the MEAN WELL NPB series battery chargers. 

Image

With these models, you can select between 2-stage charging and 3-stage charging. 

3 stage charging is the default setting out of the box and is the setting best suited to lead acid batteries. 

Set 2-stage charging if you are charging lithium-ion batteries.  

Image

You can also adjust the charging current and voltage to suit your batteries.

If you have any questions about MEAN WELL battery chargers, please do not hesitate to contact Power Supplies Australia.